Our Machine Park
From pulper bodies to pump impellers, we machine every part in our own workshop. The sheet below shows the machines at our İzmit facility in technical-drawing language — together with the largest diameters, lengths and axis travels they handle.
All dimensions are in millimetres; drawings are schematic, while workpiece and axis dimensions share a common scale.
Turning
Three separate turning lines for large-diameter shafts, rolls and rotor bodies.
Conventional Lathe
The largest of our turning lines for heavy bodies and long shafts; machines up to Ø840 mm and 3 metres in a single set-up.
- Swing diameter
- Ø 840 mm
- Turning length
- 3.000 mm
Conventional Lathe
Two identical machines share the load of mid-size shaft, sleeve and flange work.
- Swing diameter
- Ø 500 mm
- Turning length
- 2.000 mm
- Units
- 2
CNC Lathe
CNC-controlled turning for repeat precision work and tight-tolerance parts.
- Swing diameter
- Ø 500 mm
- Turning length
- 750 mm
CNC Vertical Machining Centres
Four centres for machining bodies, covers and plates — from bridge-type to compact vertical.
Bridge-Type CNC Machining
Wide-table bridge construction; machines large plates and bodies in one set-up.
- Axis travel
- X 2.000 · Y 1.500 · Z 750 mm
CNC Vertical Machining
The centre that carries the main load of long body and cover machining.
- Axis travel
- X 1.750 · Y 850 · Z 900 mm
Vertical Machining
A two-metre X axis and a full metre of Z depth for bulky parts.
- Axis travel
- X 2.000 · Y 800 · Z 1.000 mm
CNC Vertical Machining
A centre reserved for speed and repeatability on compact parts.
- Axis travel
- X 1.100 · Y 650 · Z 650 mm
Precision Cutting, Welding & Balancing
We do not only machine the part; cutting, joining and balancing happen under the same roof.
Wire EDM
Sharp internal corners and hardened materials that cutting tools cannot reach are cut by wire.
- Table
- 320 × 200 mm
- Max. cutting thickness
- 400 mm
- Taper angle
- ± 6°
Welding Station
Three processes on stainless and carbon steel; the joining side of fabrication stays in-house.
- Processes
- TIG · MAG · MIG
Vertical Balancing Machine
Every rotor we machine is balanced on our own machine before dispatch.
- Rotor weight
- 5–100 kg
- Max. rotor diameter
- Ø 800 mm
If your part fits these machines, let’s talk.
Send us your dimensions and our engineers will tell you the same day which machine — and which tolerance — your part calls for.
Get a Quote ⟩ Contact Us ⟩
ShieldCookie